Product Information

A BINDER material test chamber with mechanical convection of the FP series provides reliably short drying times and particularly fast heating – even for chambers under full loads.

Performance characteristics
  • Electronically controlled APT.line™ preheating chamber assuring temperature accuracy and reproducible results 
  • Temperature range from 5 °C above ambient temperature to 300 °C 
  • MP controller with 2 programs with 10 sections each, or alternatively 1 program with 20 sections 
  • The time of an individual program step can be set to max. 99.59 hours or 999.59 hours. This adjustment applies to all program sections. 
  • Integrated weekly program timer with real-time function 
  • Adjustable ramp function via program editor 
  • Digital temperature setting with an accuracy of one degree 
  • Adjustable fan speed 
  • Adjustable ventilation by means of front ventilation flap slide and rear exhaust Ø 50 mm 
  • Elapsed time indicator 
  • Independent adjustable temperature safety device class 2 (DIN 12880), with visual temperature alarm 
  • RS 422 interface for use with APT-COM™ DataControlSystem communication software or switch over to printer output with RS 232 / RS 422 interface converter 
  • Units up to 115 liters are stackable 
  • 2 chrome-plated racks included 
  • BINDER test confirmation 
Options
  • Access ports with silicone plug, 10, 30, 50, 100 mm 
  • HEPA fresh-air filter, Class H 14 (according to EN 1822, min. 99.999% for 0.3 µm particles) 
  • Securing elements for additional fastening of racks (1 set of 4 pieces) 
  • Anti-slip rubber pads for safe stacking (1 set of 4 pieces) 
  • Measurement of air exchange rate according to ASTM D5374, with definition and protocol according to ambient temperature (measurement in factory) 
  • Temperature measurement acc. to DIN 12880 (27 measuring points) at 150 °C or at specified temperature with measuring protocol and certificate 
  • Factory calibration certificate. Measurement in center of chamber at 150 °C (302 °F) or at specified testing temperature 
  • Extension to factory calibration certificate. Each additional measurement at additional measuring point or temperature 
  • Additional measuring channel for digital display of specimen temperature with flexible PT 100 temperature sensor, measured data recorded via RS 422 interface 
  • Independent temperature safety device class 3.1 (DIN 12880) with optical alarm 
  • Analog output for temperature 4 - 20 mA with 6-pin DIN socket (output not adjustable) 
  • Zero-voltage relay outputs accessible via 6-pin DIN socket. Additional module for controlling 2 relay outputs via 2 of the programmable controller's contacts. Zero-voltage relay outputs can be switched on and off either automatically and manually 
  • Data Logger Kit T 350: For continuous temperature recording of 0 °C to 350 °C. Kit includes 1 data logger, PT 100 sensor with 2 m Teflon extension cable and 1 fixture for mounting to the BINDER unit 
  • Data Logger converter cable RS 232 to USB 2.0 
  • Data Logger Software: Configuration and evaluation software for all BINDER Data Logger Kits, incl. data cable 
  • Rack, chrome-plated 
  • Rack, stainless steel 
  • Reinforced rack, stainless steel, with 1 set of fasteners (4 pieces), max. load 70 kg 
  • Shelf, perforated, stainless steel 
  • Locking door handle with key 
  • Door gasket, FKM (Viton) 
  • Reinforced inner chamber, including 2 reinforced racks (maximum total load 270 kg, max. load per rack 70 kg) 
  • 2 doors each with window 350 x 240 mm and interior lighting (30 W) 
  • Increased air-exchange rate through high-performance fan 
Please contact sales office for quotation

View FileBinder Product Catalogue    Size: (10.69 MB)
View FileBinder Company Brochure    Size: (3.91 MB)
View FileKaisertech Product Guide v.2.o    Size: (5.76 MB)

General Specifications

Exterior dimensions 
  • Width (mm) 1035 
  • Height (incl. feet) (mm) 825 
  • Depth (mm) 745 
  • Plus door handle and connection (mm) 105 
  • Wall clearance, rear (mm) 100 
  • Wall clearance, side (mm) 160 
  • Exhaust duct (outer Ø mm) 52 
  • Steam space volume (l) 308 
  • Number of doors (ea.) 2 
Interior dimensions 
  • Width (mm) 800 
  • Height (mm) 600 
  • Depth (mm) 510 
  • Interior volume (l) 240 
  • Racks (number standard/max.) 2 / 7 
  • Load per rack (kg) 30 
  • Permitted total load (kg) 70 
  • Weight (empty) (kg) 98 
Temperature data 
  • Temperature range approx. 5 °C above ambient temperature to (°C) 300 
  • Temperature variation 
    • at 70 °C (± K) 0,8 
    • at 150 °C (± K) 2 
    • at 300 °C (± K) 4,3 
  • Temperature fluctuation (± K) 0,3 
  • Warm-up time 1) 
    • to 70 °C (min.) 12 
    • to 150 °C (min.) 27 
    • to 250 °C (min.) 50 
  • Recovery time after doors were open for 30 sec. 1) 
    • at 70 °C (min.) 2 
    • at 150 °C (min.) 10 
    • at 300 °C (min.) 16 
Ventilation 
  • at 70 °C (x/h) 19 
  • at 150 °C (x/h) 20 
  • at 300 °C (x/h) 18 
Electrical data 
  • IP protection class acc. to EN 60529 IP 20 
  • Voltage (± 10%) 50 / 60 Hz (V) 230 1N~ 
  • Nominal power (kW) 2,7 
  • Energy consumption 
    • at 70 °C (W) 370 
    • at 150 °C (W) 850 
    • at 300 °C (W) 1400 
1) To 98% of the set value

All technical data are specified for units with standard equipment at an ambient temperature of 25 °C and a line voltage fluctuation of ±10%. The temperature data is determined in accordance to factory standard following DIN 12880, respecting the recommended wall clearances of 10% of the height, width and depth of the inner chamber. All figures are typical average values for series devices. We reserve the right to alter technical specifications at any time

Write Your Own Review

You're reviewing: Binder - FP 240 Material Test Chamber With Mechanical Convection

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Quality
Price
Value