Binder - BF 400 Incubator With Mechanical Convection
Product Information:
The BINDER incubator of the BF series with mechanical convection is suitable for all gentle incubation applications, particularly under a full load and large batch throughputs. This incubator is extremely homogeneous and has quick recovery times
Performance characteristics
The BINDER incubator of the BF series with mechanical convection is suitable for all gentle incubation applications, particularly under a full load and large batch throughputs. This incubator is extremely homogeneous and has quick recovery times
Performance characteristics
- Electronically controlled APT.line™ preheating chamber assuring temperature accuracy and reproducible results
- Temperature range from 5 °C above room temperature to 100 °C
- Digital temperature setting with an accuracy of a tenth of a degree
- MS controller with several timer functions
- Controller time functions:
- 0 to 99 h 59 min delayed ON
- 0 to 99 h 59 min delayed OFF
- 0 to 99 h 59 min temperature-dependent
- delayed OFF
- Adjustable fan speed
- Adjustable ventilation by means of front ventilation flap slide and rear exhaust Ø 50 mm
- Inner glass door
- Independent temperature safety device class 3.1 (DIN 12880) with optical alarm
- RS 422 interface for use with APT-COM™ DataControlSystem communication software or switch over to printer output with RS 232 / RS 422 interface converter
- Adjustable intervals for printer
- Units up to 115 liters are stackable
- 2 chrome-plated racks included
- BINDER test confirmation
Options
Please contact sales office for quotation- Access ports with silicone plug, 10, 30, 50, 100 mm
- Switchable audible alarm for over temperature. Adjustable limit on the independent temperature safety device
- Switchable waterproof interior socket 230 V AC (max. 500 W), protection class IP 65, with corresponding plug. Max. permissible operating temperature 50 °C
- Additional PT 100 temperature sensor, flexibly installed with external connection, includes LEMO connector (3-pin)
- Temperature measurement acc. to DIN 12880 (27 measuring points) at 37 °C or at specified temperature with measuring protocol and certificate
- Calibration certificate, measurement in center of chamber at 37 °C or at specified testing temperature
- Extension to calibration certificate. Each additional measurement at additional measuring point or testing temperature
- Anti-slip rubber pads for safe stacking (1 set of 4 pieces)
- Data Logger Kit T 220: For continuous temperature recording of -90 °C to 220 °C. Kit includes 1 data logger, PT 100 sensor with 2 m Teflon extension cable and 1 fixture for mounting to the BINDER unit
- Data Logger Software: Configuration and evaluation software for all BINDER Data Logger Kits, incl. data cable
- Rack, chrome-plated
- Rack, stainless steel
- Perforated shelf, stainless steel
- Door lock