Discontinued
Sorry – this product is no longer available, although you may find similar or newer versions below:
Similar Products
Binder - FD53 Drying Oven with forced convection 9010-0153
Product Information:
FD series units are primarily used in applications needing rapid drying and sterilization. Totally homogenous temperature distribution, rapid dynamic response, and a special air turbine which was developed by us and has 20 % higher output, have made the FD series a genuine time-saving device.
Features
FD series units are primarily used in applications needing rapid drying and sterilization. Totally homogenous temperature distribution, rapid dynamic response, and a special air turbine which was developed by us and has 20 % higher output, have made the FD series a genuine time-saving device.
Features
- Electronically controlled APT.line™ preheating chamber assuring temperature accuracy and reproducible results
- Temperature range 5 °C (32 ºF) above ambient temperature up to 300 °C (572 °F)
- DS controller with integrated timer 0 to 99 h
- Digital temperature setting with an accuracy of one degree
- Independent adjustable temperature safety device class 2 (DIN 12880), with visual temperature alarm
- Adjustable front ventilation flap slide and rear exhaust ø 50 mm (1.97 inch)
- Units up to 115 liters are stackable
- 2 chrome-plated racks included
- BINDER test certificate
Options
- Access port with silicone plugs, 10 mm (0.39 inch), 30 mm (1.18 inch), 50 mm (1.97 inch), 100 mm (3.94 inch)
- Independent adjustable temperature safety device, Class 3.1 (DIN 12880)
- Analog temperature output, 4 - 20 mA, with 6 - pin DIN socket (output not adjustable)
- Over temperature alarm, acoustic, can be switched off. Temperature limit can be set at the independent, adjustable temperature safety device class 2
- Anti-slip rubber pads for safe stacking (4 pieces)
- Temperature measurement acc. to DIN 12880 (27 measuring points) at 150 °C (302 °F) or at specified temperature with measuring protocol and certificate
- Factory calibration certificate. Measurement in center of chamber at 150 °C (302 °F) or at specified testing temperature
- Extension to factory calibration certificate. Each additional measurement at an additional measuring point or temperature
- Rack, chrome - plated or stainless steel
- Shelf, perforated, stainless steel
- Lockable door
- FKM door gasket
- Door with window and interior lighting, 15 W (230 x 230 mm / 9.06 x 9.06 inch)