Hektor separates milled PCBs carefully and fast. The offcut material is removed smoothly and precisely. The matrix consists of two parts. This ensures easy and cost-saving change of the blades. Compressed air is used for the separation process.

The operating pressure can be set on the machine. When the foot switch is pressed, the off-cut is punched out. The off-cuts are collected in the collecting box. When the gate is opened the waste material can be extracted.

Safe operation with Off-Cut Remover Hektor 2

The PCB is slipped with its milled groove over the blade and is placed onto the matrix. The off-cut is pulled under the blade. When the foot switch is pressed, the off-cut is punched out and the waste material is collected inside the machine.

T-Blade

With the T-blade off-cuts can be punched out right and left of the blade without turning the PCB.
 

L-Blade

The L-blade will be used if there are small distances between the off-cuts

 

Matrix

Included in delivery.