Are there any simple tips on a desoldering process?

Use a tip with a larger diameter than the pad to achieve maximum aspiration and thermal efficiency.

1. Placing

 Screen Shot 2015-03-24 at 09.24.14

Place the tip with the component terminal in the hole.

2. Rotating

Screen Shot 2015-03-24 at 09.24.28

When the solder liquefies, gently rotate the tip so that the component terminal can be lifted off.

3. Aspirating

Screen Shot 2015-03-24 at 09.24.36

Press the vacuum pump button long enough to remove the solder.

After pressing the desoldering key there is a slight delay until the self-contained vacuum pump stops. This makes sure that the vacuum circuit is completely empty. If any solder remains are left on a terminal after desoldering it, resolder it with fresh solder and repeat the desoldering operation.

Contact Kaisertech

Leave a Reply

My question isnt answered here

If you can't find your question answered please give us a call, alternatively email us or use the chat box (bottom right of your screen) to get an answer quickly.

Call us: +44 023 8065 0065 Email
Scroll to top