ESD Anti Static Rubber matting 1200mm x linear meter - Grey
- ESD Dissipative top surface, ESD conductive bottom surface
- Resistant to heat
- Hard wearing
- Good lay flat properties
- Mat fitted with 10mm stud - 2mm thickness
- Custom sizes available
- Resistance to ground 106-5x107 Ohm
- Conforms to IEC 61340-5-1
2 layer static dissipative rubber mat, high durable work surface for ESD sensitive environment.
The dissipative top layer is resistant to abrasion, heat, solders flux and most commonly used solvents.
The black conductive bottom layer provides a superior and consistent ground path. This meets the requirements of US ESD Associations ANSI S4.1 and S20.20 guidelines.
The smooth texture can be easily cleaned and maintained.
Certified for ROHS regulations.
Very scratch resistant and it prevents sliding of components.
Material- synthetic rubber
Construction- Two layer, static dissipative top surface, black conductive bottom layer.
|ESD Bench/Floor Matting Specification Sheet Size: (176.34 KB)|
Thickness: 0.076 (2.00mm)
Colour – Grey, Blue (this may vary between batches)
Hardness: Per ASTM D2240
Upper dissipative layer – 70 -5 + 5 shore A
Lower conductive layer – 75 -5 + 5 shore A
Scratch resistance: No clear scratch and well recovery
Heat resistance: Resist holds irons and hot paste, rubber doesn’t melt if in contact with hot metal parts and soldering debris.
UV resistance: No major disc
Charge Decay: < 0.1 sec per FTMS 101C, M4046
TB-WINT-0008 Charge generation: < 100 volts per ANSI/ ESD STM4.2
Others: No curling, No pin holes, No irritant odor
Sizes: Standard roll sizes are 10m x 1.2m and 10m x 0.60.
Room temperature: 21℃
Cleaning: For optimum electrical performance surface must be cleaned regularly using an ESD safe mat cleaner.
|Item||Top layer||Bottom Layer|
|300% tensile strength||3.7Mpa|
|Elongation at break||690Mpa||250Mpa|