Product Information:

FD series units are primarily used in applications needing rapid drying and sterilization. Totally homogenous temperature distribution, rapid dynamic response, and a special air turbine which was developed by us and has 20% higher output, have made the FD series a genuine time-saving device.


Features:

• Electronically controlled APT.line™ preheating chamber assuring temperature accuracy and reproducible results
• Temperature range 5°C (32 ºF) above ambient temperature up to 300°C (572°F)
• DS controller with integrated timer 0 to 99 h
• Digital temperature setting with an accuracy of one degree
• Independent adjustable temperature safety device class 2 (DIN 12880), with visual temperature alarm
• Adjustable front ventilation flap slide and rear exhaust Ø 50 mm (1.97 inch)
• Units up to 115 liters are stackable
• 2 chrome-plated racks included
• BINDER test certificate

Options

• Access port with silicone plugs, 10 mm (0.39 inch), 30 mm (1.18 inch), 50 mm (1.97 inch)
• Independent adjustable temperature safety device, Class 3.1 (DIN 12880)
• Analog temperature output, 4 - 20 mA, with 6 - pin DIN socket (output not adjustable)
• Over temperature alarm, acoustic, can be switched off. Temperature limit can be set at the independent, adjustable temperature safety device class 2
• Temperature measurement acc. to DIN 12880 (27 measuring points) at 150 Ì´åÁC (302 Ì´åÁF) or at specified temperature with measuring protocol and certificate
• Factory calibration certificate. Measurement in center of chamber at 150 Ì´åÁC (302 Ì´åÁF) or at specified testing temperature
• Extension to factory calibration certificate. Each additional measurement at an additional measuring point or temperature
• Rack, chrome - plated or stainless steel
• Shelf, perforated, stainless steel
• Lockable door
• FKM door gasket
• Door with window and interior lighting, 15 W (180 x 180 mm / 7.09 x 7.09 inch)