Binder - MKFT 240 Environmental test chamber for complex temperature profiles
Product Information:
Environmental simulation chamber for low temperature alternating climate profiles.
The BINDER MKFT series environmental simulation chamber for low temperature alternating climate profiles is the specialist for dynamic alternating climate change between -70 °C and 180 °C. Large performance reserves and rapid cooling make the MKFT environmental simulation chamber the high-end product for complex standards-based climate tests.
Please contact sales office for quotation
Environmental simulation chamber for low temperature alternating climate profiles.
The BINDER MKFT series environmental simulation chamber for low temperature alternating climate profiles is the specialist for dynamic alternating climate change between -70 °C and 180 °C. Large performance reserves and rapid cooling make the MKFT environmental simulation chamber the high-end product for complex standards-based climate tests.
Please contact sales office for quotation
- Electronically controlled APT.line™ preheating chamber assuring temperature accuracy and reproducible results
- Temperature range without humidity: -70 °C to 180 °C
- Temperature range with humidity: 10 °C to 95 °C
- Humidity range 10 % to 98 % RH
- MCS controller with 25 storable programs of 100 sections each for a maximum of 500 program segments
- User-friendly LCD screen
- Easy-to-read menu guide
- Integrated electronic chart recorder
- Variety of options for the graphic display of process parameters
- Real-time clock
- Electronically controlled humidification and dehumidification system with capacitive humidity sensor and vapor pressure humidification
- Integrated water storage tank
- Heated viewing window with LED interior lighting
- Programmable condensation protection for test material
- Adjustable ramp function via program editor
- 230 V power socket on the right-side operating panel
- Independent adjustable temperature safety device Class 2
- 4 potential-free relay outputs that can be activated via MCS controller
- Ethernet interface for use with optional GMP/GLP and FDA guideline 21 CFR Part 11 compliant APT-COM™
- DataControlSystem software
- BINDER Communication software APT-COM™ 3 Basic Edition
- Access port Ø 50 mm, left side
- 4 casters (2 with brakes)
- Stainless steel rack included
- BINDER test confirmation
Options
- Access ports with silicone plug, 30, 50, 80, 100, 125 mm
- Securing elements for additional fastening of racks (1 set of 4)
- Analog output for temperature 4 - 20 mA with 6-pin DIN socket (output not adjustable)
- Door lock
- Additional measuring channel for digital display of specimen temperature with flexible PT 100 temperature sensor. Measuring data recorded through device interface
- Temperature safety device for over and under temperature, Class 2
- RS 422 interface
- Temperature measurement acc. to DIN 12880-2 and 9-point humidity measurement/factory standard with protocol and certificate at 25 °C / 60% RH or at specified values
- Calibration certificate for temperature and humidity. Measurement in center of chamber at 25 °C / 60% RH or at specified values
- Extension to calibration certificate for temperature and humidity. Each additional measurement at an additional measuring point or set of values
- BINDER PURE AQUA SERVICE containing single-use cartridge, cabling, and pump
- Single-use cartridge for BINDER PURE AQUA SERVICE
- Water circle, possibility to reuse water
- Data Logger Kit TH 100/70: With two attachable combined sensors for temperature and humidity recording
- Data Logger Kit TH 100: With one attachable combined sensor for temperature and humidity recording
- Data Logger Kit TH 220: With PT 100 sensor for temperature recording
- Data Logger Software
- Rack, stainless steel
- Reinforced rack, stainless steel, with 1 set of fasteners (4 pieces), max. load 70 kg
- Shelf perforated, stainless steel
- Notch-type access port in door, 100 x 35 mm