Binder FD23 Drying oven with forced convection

FD23 Drying oven with forced convection

Zoom Out
Zoom In

Product Information:

FD series units are primarily used in applications needing rapid drying and sterilization. Totally homogenous temperature distribution, rapid dynamic response, and a special air turbine which was developed by us and has 20% higher output, have made the FD series a genuine time-saving device.


Features:
  • Electronically controlled APT.line™ preheating chamber assuring temperature accuracy and reproducible results
  • Temperature range 5°C (32 ºF) above ambient temperature up to 300°C (572°F)
  • DS controller with integrated timer 0 to 99 h
  • Digital temperature setting with an accuracy of one degree
  • Independent adjustable temperature safety device class 2 (DIN 12880), with visual temperature alarm
  • Adjustable front ventilation flap slide and rear exhaust Ø 50 mm (1.97 inch)
  • Units up to 115 liters are stackable
  • 2 chrome-plated racks included
  • BINDER test certificate
Options
  • Access port with silicone plugs, 10 mm (0.39 inch), 30 mm (1.18 inch), 50 mm (1.97 inch)
  • Independent adjustable temperature safety device, Class 3.1 (DIN 12880)
  • Analog temperature output, 4 - 20 mA, with 6 - pin DIN socket (output not adjustable)
  • Over temperature alarm, acoustic, can be switched off. Temperature limit can be set at the independent, adjustable temperature safety device class 2
  • Temperature measurement acc. to DIN 12880 (27 measuring points) at 150 Ì´åÁC (302 Ì´åÁF) or at specified temperature with measuring protocol and certificate
  • Factory calibration certificate. Measurement in center of chamber at 150 Ì´åÁC (302 Ì´åÁF) or at specified testing temperature
  • Extension to factory calibration certificate. Each additional measurement at an additional measuring point or temperature
  • Rack, chrome - plated or stainless steel
  • Shelf, perforated, stainless steel
  • Lockable door
  • FKM door gasket
  • Door with window and interior lighting, 15 W (180 x 180 mm / 7.09 x 7.09 inch)
View FileKaisertech Product Guide v.2.o    Size: (5.76 MB)

General Specifications

Exterior dimensions 
  • Width (mm/inch) 433 / 17.1 
  • Height (inclusive feet/castors) (mm/inch) 492 / 19.4 
  • Depth (mm/inch) 516 / 20.3 
  • Plus door handle, I-panel and exhaust duct (mm/inch) 85 / 3.4 
  • Wall clearance rear (mm/inch) 100 / 3.9 
  • Wall clearance side (mm/inch) 100 / 3.9 
  • Exhaust duct outer- Ø (mm/inch) 52 / 2.1 
  • Steam space volume (l/cu.ft.) 36 / 1.3 
  • Number of doors 1 
Interior dimensions 
  • Width (mm/inch) 222 / 8.7 
  • Height (mm/inch) 330 / 13.0 
  • Depth (mm/inch) 277 / 10.9 
  • Interior volume (l/cu.ft.) 20 / 0.7 
  • Racks, chrome-plated (number standard/max.) 2 / 3 
  • Load per rack (kg/lbs.) 12 / 26 
  • Permitted total load (kg/lbs.) 25 / 55 
  • Weight of the unit (empty) (kg/lbs.) 33 / 73 
Temperature data 
  • Temperature range, 5 °C (41 °F) above ambient up to (°C / °F) 300 / 572 
  • Temperature variation 1) 
    • at 70 °C (± °C) 0.8 
    • at 150 °C (± °C) 2.2 
    • at 300 °C (± °C) 4.3 
  • Temperature fluctuation (± °C) 0.3 
  • Heating up time 1), 2) 
    • to 70 °C (Min.) 7 
    • to 150 °C (Min.) 22 
    • auf 300 °C (Min.) 45 
  • Recov. time after door was opened for 30 sec. 
    • at 70 °C (Min.) 2 
    • at 150 °C (Min.) 4 
    • at 300 °C (Min.) 9 
Air change data 
  • at 70 °C (x/h) 59 
  • at 150 °C (x/h) 64 
  • at 300 °C (x/h) 53 
Electrical data 
  • Housing protection acc. to EN 60529 IP 20 
  • Nominal voltage (±10 %) 50 / 60 Hz (V) 230 / 115 
  • Nominal power (kW) 0.8 
Energy consumption 
  • at 70 °C (W) 145 
  • at 150 °C (W) 300 
  • at 300 °C (W) 720 
1) value without window 
2) up to 98 % of the set value 

Write Your Own Review

You're reviewing: Binder FD23 Drying oven with forced convection

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Value
Quality
Price