BINDER - BF Series Incubator With Mechanical Convection
BINDER - BF Series | Incubators with Mechanical Convection
The BINDER Incubator of the BF series with mechanical convection is suitable for all gentle incubation applications, particularly under a full load and large batch throughputs. This Incubator is extremely homogeneous and has quick recovery times. It is suitable for delicate procedures that require consistent temperature control and rapid stabilization after door openings, ensuring predictable and effective results in high-demand environment.
Key Features:
Electronically Controlled APT.line™ Preheating Chamber- This ensures temperature accuracy and reproducible results. It preheates the innner chamber to create an optimal environment for delicate incubation processes.
Inner Glass Door and chrome-plated racks - The inner glass door and chrome-plated racks keep the temperature steady while allowing visibility into the chamber. There are 2 chrome plated racks available for storage and organization.
Precise temperature control - Temperature can be set digitally to within 0.1°C, providing exquisite control for delicate processes.
Adjustable Ventilation - The incubator features adjustable ventilation, featuring a front flap slide and a rear exhaust (Ø 50 mm) to maintain a steady temperature throughout.
Performance Characteristics
- Temperature range from 5 °C (9 °F) above room temperature to 100 °C (212 °F)
- MS Controller with flexible time control
Delayed ON Timer: 0 to 99 hours 59 minutes
Delayed OFF Timer: 0 to 99 hours 59 minutes - Adjustable Fan speed
- Independent Temperature Safety Device (Class 3.1, DIN 12880) - Provides enhanced safety
- RS 422 Interface- Allows remote monitoring and control with an APT-COMTM DataControlSystem software connection. also supports RS 232/RS 422 interface conversion for printer output.
- Adjustable Printer Intervals
- Stackable Units - Upto 115 liters
- BINDER TEST CONFIRMATION
Models In The BD Series
| BF 56 | 2.08 cu.ft |
| MPN | 9010-0313 |
| BF 115 | 4.03 cu.ft |
| MPN | 9010-0315 |
| BF 260 | 9.08 cu.ft |
| MPN | 9010-0319 |
| BF 400 | 14.13 cu.ft |
| MPN | 9010-0241 |
| BF 720 | 25.92 cu.ft |
| MPN | 9010-0321 |
Additional Options & Accessories (For Full List & Part Numbers See Product Downloads)
- Access ports with silicone plug, - Available in 10, 30, 50 mm
- Audilbe Alarm for Over temperature
- Waterproof Interior Sockets 230 V AC (max. 500 W), protection class IP 65, with corresponding plug. Max. permissible operating temperature 50 °C
- Additional PT 100 Temperature Sensor flexibly installed with external connection, includes LEMO connector (3-pin)
- Temperature measurement acc. to DIN 12880 (27 measuring points) at 37 °C or at specified temperature with measuring protocol and certificate
- Calibration certificate measurement in center of chamber at 37 °C or at specified testing temperature
- Anti-slip Rubber Pads for Safe Stacking - This four-piece set is designed to keep units secure when stacked.
- Data Logger Kit T 220: For continuous temperature recording of -90 °C to 220 °C. Kit includes 1 data logger, PT 100 sensor with 2 m Teflon extension cable and 1 fixture for mounting to the BINDER unit
- Data Logger Software: Configuration and evaluation software for all BINDER Data Logger Kits, incl. data cable
- Perforated shelf, stainless steel
- Door lock
Please contact sales office for quotation