JBC FL-50 Flux In Bottle 500ml With Decanting Tube
JBC FL-50 Flux Bottle With Decanting Tube - 500ml
FL is a liquid flux water based designed to be used in the preparation of printed circuits prior to soldering an SMD component, especially flat pack integrated circuits.
Equiped with decanting tube and 500ml capacity.
“NON RESIDUE” Classified Flux
How to use
1. Clean and degrease the surfaces to be soldered.
2. Use the brush to apply the flux to the integrated circuit pads.
3. Do the solder joint.
4. Flux remains are inert, do not cause electrical or chemical problems.
If you want to remove it, use water for cleaning them.
Therefore it is a product respectful with the environment.
Storage
- Store inside a tightly sealed container at 20°C.
- Once opened, use within 6 months.