Liquid Flux BC310-15 RMA - Rosin Clean No-Clean

This item is shipped directly from the manufacturer and therefore is not eligible for free delivery.

Flux type BC310-15 contains 15% of activated rosin. Conforms with the standard NFC 90550 in RMA class.

Use Instructions

BC310-15 can be used for foam fluxing in all types of automatic soldering machines. Due to concentration, the flux reduces the formation of icicles, craters and facilitates good capillary rise in metallised plated through holes.

Suitable for dip tinning amongst other general soldering applications.

Preheat temperature after fluxing should be between 90/100°C to give good activation.

Residue may remain on the PCB without risk of corrosion or loss of insulation resistance. Remaining residues should be cleaned efficiently to leave no surface film - with the use of alcoholised solvent.

Health & Saftey - Use in well-ventilated area

Packaging - Available in 1, 5 or 10 litre quantities

Storage - Store at recommended temperature of 20°C for 12 months

MBO Liquid Fluxes

Wide range of liquid fluxes available for the soldering of high-reliability electronics to more difficult electrical & industrial applications.

No-clean fluxes offer the highest reliability, available in a range to enable superior soldering of tin-lead, bare copper, nickel gold &lead-free finishes.

Designed to reduce solder defects, decrease rework & increasing production output.

For more information on delivery options please contact your account manager or sales.

Tel: 02380 650065 | Email: [email protected]