ESD Replacement Cord Stud To Stud Yellow 1.8m

A good quality stud to stud coiled earth lead that supplies a strong connection to ground. The cord can be stretched and recoiled back to its original length, assisting to keep a clear, efficient and comfortable working space. All snaps have 1 meg-ohm safety resistor. 

Designed to be worn in an ESD working area and is important when handling components or assembling parts in an EPA. Wearing this will prevent the build-up of static on the operators body, which protects any electrical equipment that is being handled from being damaged. 

Must be used in combination with a grounding cord and bonding plug to ensure operator is grounded. 

Key Features:

• Standard cord with dual molding on terminations for maximum strain relief
• All snaps have 1 meg ohm safety resistor
• Durable and must be used in combination with a grounding cord and bonding plug to ensure operator is grounded
• Premium cord, exceeding 20,000 cycles of bending life test

Breakaway Force: 1 to 5 lbs. Of pull away force is required to disconnect the snap in a normal disconnect direction

Ground Lead Extendability: Cord should return back to at least 85% of its original length is less than 10 minutes after hanging for 24 hours, with 1kg weight on the other end.