JBC DMPSE-2QA 4 Tools DME Station with Electric Pump
The DME manages up to 4 tools simultaneously and is fully compatible with 10 different JBC tools. Check below the complete list of compatible tools.
The MSE Electric Desoldering Module is indispensable for a complete desoldering process.
It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation modeshelp to extend life of tips.
It features all the Excellence range benefits such as station customization, full control of soldering processes and remote work management.
Although the Control Unit is compatible with 10 different JBC tools, the DMPVE works simultaneously with the T210 Precision Purpose Handle, the T245 General Purpose Handle, the AM120 Micro Tweezers and the DR560 Desoldering Iron.
|Temperature (DDE)||90 to 450 ºC / 190 to 840 ºF|
|Dynamic Soldering Profiles||
Designed to avoid thermal shock when soldering Ceramic Chip components like MLCC, this new and unique feature allows controlling the heating ramp up rate of the tool to gradually increase the temperature of the component through all the phases of the soldering process. Up to 25 fully configurable soldering profiles can be stored.
|Sleep and Hibernation mode(DDE)||These modes lower soldering tip temperature when the tool rests in the stand in order to avoid oxidation and extending tip life.|
|Max. and min. temperature||Limit the temperature range in which the operator is allowed to work.|
|Temperature levels (DDE)||
Instant selection of up to 3 editable temperature settings for solder joints with different heat requirement.
|Soldering graphics||Real time visualization of tip temperature and power delivered to the solder joint during soldering process.|
|PIN protection||Keep station parameters protected against unauthorized access.|
|10 user interface languages||English, German, Spanish, French, Italian, Portuguese, Russian, Japanese, Korean, Chinese.|
|Vacuum (MSE)||75% / 570 mmHg / 22.4 inHg|
|Flow rate (MSE)||9 SLPM|
|USB-B (rear)||Software PC / Traceability|
Soldering Graphics / Profiles management.
Dino-Lite USB microscope connection. Compatible models: AM2011 and AM2111.
RS-232 remote control or Smart Fume Extractor connection
Remote control / Traceability
|PS||Interconnection of up to 5 PSE control units to manage up to 24 tools simultaneously|
|Tip to ground resistance||
<2 mV RMS
|Peak Power (DDE)||160 W per tool – 23.5 V|
ref. DMPSE-2QA - 230 V